PROUDLY MADE IN THE USA
This sear and spring kit will make an amazing difference in the feel of your rifle's trigger. You'll have a clean break of around 1.5 - 4 pounds. Takes a few minutes to fit the sear to the rifle and you may have to do a bit of filing.
Timney uses sear with reduced engagement notch to get crisp pull. It is not so crisp as set screw for engagement needs to be adjusted a bit more finely. But they must have used LocTite 271 Red on it as I had to use soldering iron on screw head to break the bond. .THEN was able to get 9crisp break. BUT now you have t p readjust and stone the safety. Now you have a one of a kind gun. Easier to judge to be oem seat too to get crisp pull, cost nothing. I have 3 of these guns and have done a dozen more, ALL with tuned I am parts.
Same parts work on a Ruger 77/357. Clean crisp, 3 pound break, no mush or creep.
Pull weight is the amount of pressure, in ounces or pounds, required to fire the trigger. Or in other words, how hard you have to squeeze the trigger to shoot your rifle.
Timney Trigger experts at our Phoenix, Arizona plant hand-test every trigger in its intended action and then set the pull weight at our factory standard, 3 lbs.
If you prefer a different pull weight you simply select it from the drop down above and your Timney Trigger will be customized to your preference.
The #1 reason to replace your factory trigger with a Timney is accuracy. A lighter, crisper, more consistent trigger pull will make you more accurate with your firearm.
Below is a guide for pull weight selection:
Light trigger pull weights are great for people shooting lighter weight rifles as they can help keep you on target during the shot. Also common weights for target shooting from a bench.
By far the most common trigger pull weights -this is great for virtually all applications including target shooting, hunting and 3-gun competitions.
Heavy trigger pull weights are good for cold weather hunting or applications where you may be shooting with gloves on.