CZ 452 Trigger

Item #: 452M
Model  
Pull Weight  
Our Price: $108.11
Qty:
 

Description  more details

Timney Sportsman Triggers feature a lightweight alloy housing and hardened steel working surfaces. They are lightweight, rugged and durable. The trigger pull is adjustable from 2 to 4 lbs and is adjustable for Sear Engagement, Overtravel and Pull weight. These triggers require the use of the original safety. Minor fitting may be required.

Since it was founded in 1946, Timney Triggers has built a reputation based on the quality of its products. Because of the precision machining and workmanship that goes into each Timney product they are The World's Finest Triggers.™ Each and every Timney Trigger is individually tested and calibrated by hand in the action it was designed for before it's delivered to the customer's door. 

CZ 452 and 455 Adjustment Instructions

This is where I want you to file. Take a few thousandths of an inch off of this flat on the back of the trigger. Don’t change the angle of the flat but do increase it slightly. This will allow the safety to lift the sear completely off of the trigger so that when you pull it there’s no click.

CZ 455 and 452

Make sure the rifle is unloaded.

Cock the rifle.

The bottom screw is your sear engagement.

Using a .050 hex wrench I want you to slowly turn this screw clockwise until the rifle fires.

Now turn it counter clockwise one flat of the wrench or 1/16 of a turn.

A nylock dowel will hold the screw in place so that it doesn’t move.

The pull weight screw is adjusted by the top screw with the nut on it.

To adjust your pull weight you will loosen the nut and using a 5/64 hex wrench, turn the screw clockwise to increase the pull weight; or counter clockwise to decrease your pull weight.

The pull weight adjustment works by the screw pressing against a spring which in turn presses against the trigger. As you turn it clockwise (pushing the screw further into the housing) the screw compresses the spring and the pull weight goes up. AS you back out the screw (counter clockwise) the pull weight drops lower.

Be careful not to drop the pull weight too low or you will lose spring pressure and it will fire when the bolt is slammed.

Use a trigger pull gauge to measure the pull weight. It should not go below 2lbs.

Tech Guide Downloads

CZ 452 & 455 Adjustment Instructions.pdf
CZ 455 and 452.pdf

Reviews

Be the first to submit a review on this product!
Review and Rate this Item

This trigger works with these rifles:

  • CZ 452 .17 HMR
  • CZ 452 .22 Long Rifle
  • CZ 452 .22 Mag

Other Items In This Category

CZ 455 Trigger
Price: $108.11
CZ 550
Price: $103.95

What Is Trigger Pull weight?

Pull weight is the amount of pressure, in ounces or pounds, required to fire the trigger. Or in other words, how hard you have to squeeze the trigger to shoot your rifle. Timney Trigger experts at our Phoenix, Arizona plant hand-test every trigger in its intended action and then set the pull weight at our factory standard, 3 lbs.

If you prefer a different pull weight you simply select it from the drop down above and your Timney Trigger will be customized to your preference.

The #1 reason to replace your factory trigger with a Timney is accuracy. A lighter, crisper, more consistent trigger pull will make you more accurate with your firearm.

Below is a guide for pull weight selection:

2-2.5 pounds

Light trigger pull weights are great for people shooting lighter weight rifles as they can help keep you on target during the shot. Also common weights for target shooting from a bench.

3-3.5 pounds

By far the most common trigger pull weights -this is great for virtually all applications including target shooting, hunting and 3-gun competitions.

4.0 pounds+

Heavy trigger pull weights are good for cold weather hunting or applications where you may be shooting with gloves on.