• Ruger® 10/22® Trigger

Ruger® 10/22® Trigger

Item #: 1022
Trigger Shoe Color  
Housing Color  
Our Price: $248.71


This Timney trigger undoubtedly sets the standard for aftermarket trigger upgrades for the Ruger®1022®.

Featuring a one piece action of CNC machined 6061-T6 aircraft grade billet aluminum the new Timney Trigger for the Ruger® 1022® is a complete action replacement.

The trigger, sear, and hammer are wire EDM cut and heat treated steel for exceptional durability. Push out the two action pins and “drop in” the new Timney complete trigger assembly.

The Timney Trigger features a Timney designed extended magazine release that can be operated by one finger for exceptional ease and accessibility.

It also comes standard with an auto bolt release. As with all the Timney Triggers made in the U.S.A. each complete action replacement is hand assembled, calibrated and tested for a lifetime of reliable service.

The trigger is set at 2 3/4 pounds from the factory, with no creep. It comes in a variety of trigger shoe colors:

Available in black or silver housting with your choice of 6 different trigger shoe colors:

  • 1022®-1c black
  • 1022®-2c red
  • 1022®-3c blue
  • 1022®-4c gold
  • 1022®-5c green
  • 1022®-6c silver


Average Rating:
(based on 6 reviews)

Showing 1 - 5 of 6 Reviews:

by David Vanderpool
on 9/11/2017
from Oregon
Appears to be poor QC
As a gunsmith, I purchased a replacement trigger set fir my 10/22 and had to take an Arkansas Store to the sear to smooth out (what appeared to be) a tiny machine mark that could  effectthe release.  Upon disassembly, I also found a small metal shaving inside the housing.
Both corrections took little effort or time but for the cost of the unit, I expected better.  After some discussion with my customer, I immediately refunded my customer, and called CS to return / exchange the unit and was told that my work voided the warranty, no return (RMA) would be accepted.    Needless to say I am not a satisfied customer.
by CG
on 2/10/2016
from S.C
Excellent Trigger
Clean light crisp break. No mush.  Vey good.
by Howard M Martinez Jr
on 2/16/2015
from United States
Poor Quality Control
I purchased a Timney trigger for a Ruger 10/22 rifle.  The problem is the diameters of the holes for the receiver cross pins are 0.15 inches too small and the pins will not go into the trigger assembly.  I could drill out the holes to the correct size but after paying $200+ for the trigger, I should have to custom fit it?
by Allen Crouch
on 9/14/2014
from Connecticut
Bolt hold open lever
Really a nice trigger with a great trigger pull but the unit will not fit my Tactical Solutions X-Ring receiver and the bolt hold open lever is a little too short. You can almost break a finger nail. The bolt hold open lever works flawlessly but could be a little bit longer, you really have to work at it to get it to do it's job. I installed it on my 10 year old grandson's 10-22 which he really liked it except for the bolt hold open issue. I had to replace it with the original assembly so it would be safe for him.   
by Jim Kammerer
on 9/6/2014
from Cincinnati, OH
RUGER 10/22 trigger
EXCELLENT IN EVERYWAY!!! Perfect trigger pull.
With the extended magazine release (which is super) the auto bolt release could be a little longer since the mag release extends out farther than the bolt release.
I actually purchased an extended auto bolt release but found out that the Timney one has been highly modified and can't be replaced.
Great product with excellent workmanship.
Review and Rate this Item

This trigger works with these rifles:

  • Ruger® 10/22 50th Anniversary
  • Ruger® 10/22 Carbine
  • Ruger® 10/22 Compact
  • Ruger® 10/22 Lite
  • Ruger® 10/22 Sporter
  • Ruger® 10/22 Tactical
  • Ruger® 10/22 Take down
  • Ruger® 10/22 Target
  • Ruger® SR-22 Auto Loading Rifle *

What Is Trigger Pull weight?

Pull weight is the amount of pressure, in ounces or pounds, required to fire the trigger. Or in other words, how hard you have to squeeze the trigger to shoot your rifle. Timney Trigger experts at our Phoenix, Arizona plant hand-test every trigger in its intended action and then set the pull weight at our factory standard, 3 lbs.

If you prefer a different pull weight you simply select it from the drop down above and your Timney Trigger will be customized to your preference.

The #1 reason to replace your factory trigger with a Timney is accuracy. A lighter, crisper, more consistent trigger pull will make you more accurate with your firearm.

Below is a guide for pull weight selection:

2-2.5 pounds

Light trigger pull weights are great for people shooting lighter weight rifles as they can help keep you on target during the shot. Also common weights for target shooting from a bench.

3-3.5 pounds

By far the most common trigger pull weights -this is great for virtually all applications including target shooting, hunting and 3-gun competitions.

4.0 pounds+

Heavy trigger pull weights are good for cold weather hunting or applications where you may be shooting with gloves on.